| | Name | Description |
|---|
 | AddPhaseCorrectionSegment |
Adds a new vertical or horizontal segment for the phase mask adjustment, then recomputes the fit.
(Only for multi-segment phase correction method. The method needs at least one vertical and one horizontal segment).
Call ComputePhaseMask to apply.
|
| AddPhaseCorrectionZone |
Adds a phase correction zone, either rectangular or an ellipse. Call ComputePhaseMask to apply.
|
| AddPhaseMonitorZone | |
| AddPhaseOffsetAdjustmentZone |
Adds a phase offset correction zone. (Valid only for the multi-zone phase offset method)
|
| AutoComputePhaseMaskUsingSegments |
Performs an automatic adjustment of phase parameters, including crossed-terms, using an iterative method.
|
| AutoComputePhaseMaskUsingZones |
Perform a 2D phase fit on a rectangular zone.
|
| ComputePhaseHistogram |
Computes the histogram of the phase image (or of its ROI).
Call getPhaseHistogram to get the result.
|
| ComputePhaseMask |
Recomputes the phase correction mask.
|
| ComputePhaseStdDev |
Computes the mean value and standard deviation of the phase image (or its region of interest if one is defined).
Use PhaseMeanValue and PhaseStdDev to read the result.
|
| ConfigureProcessing | |
| CopyAmp32fToMemStream | |
| CopyAmpToMemStream | |
| CopyHoloToMemStream | |
| CopyHoloToRH |
Copies the current hologram known by the reconstruction to the array of holograms used as reference. Prefer a copy to array using
GetAvgRHBufHolo(Int32) when using several avaraged holograms
|
| CopyImg32fResult(Single, Int32, windowsList) |
Copies the floating point image result of processing in a local buffer.
|
| CopyImg32fResult(Single, Int32, windowsList, Boolean) |
Copies the floating point image result of processing in a local buffer.
|
| CopyImgResult |
Copies the image result of processing in a local buffer.
|
| CopyPhase32fToMemStream | |
| CopyPhaseToMemStream | |
| CreateStitching | |
| CutNewEllFourierRegion | |
| CutNewRectFourierRegion | |
| Dispose | |
| DoAutoPhaseCorrectionNoCT | |
| DoMonitorPhaseZone | |
| DumpPhaseMonitor | |
| ExtractArbitraryIntensityProfile |
Extracts a profile in the intensity (amplitude) image. Use AmpProfile to get the result.
|
| ExtractArbitraryPhaseProfile |
Extracts a profile in the phase image. Use PhaseProfile to get the result.
|
| ExtractProfile | |
| ExtractROI |
Sets a region of interest in the phase and intensity images.
|
| GetAmp32f | |
| GetAvgRHBufHolo |
Gets a reference to the byte array to copy the reference hologram data when using several averaged holograms
|
 | GetDistance |
Gets or sets the reconstruction distance for one of the laser source, in [m]. The value must include the Objective-Source Correction.
The new value will be used on the next processed image.
To reprocess the last hologram, call OnDistanceChange(windowsList) after setting the value.
|
| GetNumFourierFilters | |
| GetOplValue | |
| GetPhase32f | |
| GetPhaseCorrectionCoefficient | |
| getPhaseHistogram |
Gets the phase histogram. Call ComputePhaseHistogram to compute it.
|
| GetPhaseValue | |
| InitProcessingChain | |
| LoadFourierRegion | |
| LoadPhaseOffsetAdjustmentZones | |
| LoadRefHolo | |
| OnDistanceChange |
Recomputes the phase mask and redoes the Fresnel transform, then process the images defined in visMask.
Call after changing the reconstruction distance (SetDistance(Int32, Double)).
|
| OnNewImage(windowsList) |
Signals that a new image is available in the memory pointed by ImgHolo, gives it to the processing chain and processes it.
|
| OnNewImage(Hologram, windowsList) |
Gives a new image to the processing chain and processes it.
|
| ParsePhaseOffsetAdjustmentZones | |
| PerformAutoFocus |
Compute the focus position.
|
| PhaseToHeightNmConversionFactor |
Returns the phase [rad] to height [nm] conversion factor.
|
| Process |
Reconstructs the image pointed by ImgHolo |
| RecomputePostProcessing |
Recompute the phase and intensity post processing, including non-measured points mask
|
| RecomputeSpectrumKxKy | |
| ReconstructFile | |
| ReconstructSequence | |
| RedoFourierFilter | |
| RefreshAmplitude | |
| RefreshFourier | |
| RefreshIntensityPhase | |
| RefreshPhase | |
| RemoveLastFourierFilter | |
| ResetFourierRegions | |
| ResetPhaseCorrectionSegments |
Removes all phase correction segments. Call AutoComputePhaseMaskUsingSegments(windowsList, phaseFitMethod, Int32, Boolean) to apply.
|
| ResetPhaseCorrectionZones |
Removes all phase correction zones. Call AutoComputePhaseMaskUsingZones(windowsList, phaseFitPolyBase, Int32, Boolean) to apply.
|
| ResetPhaseMask | |
| ResetPhaseMonitorZones | |
| ResetPhaseOffsetAdjustmentZones | |
| ResetROI |
Removes the region of interest for the phase and amplitude images.
|
| ResetTemporalPhaseAverage |
Resets the temporal averaging count.
The next reconstructed hologram will be the first of the next averaging process.
|
| SaveFourierRegion | |
 | SaveHologram(Hologram, String) |
Saves a hologram in TIFF format
|
| SaveHologram(Hologram, String, IHardwareConfiguration, IHolographicMeasurementConfig, Int32) |
Saves a hologram in TIFF format
|
| SaveImage |
Saves an image in TIFF format
|
| SaveImageFloat(windowsList, String, Single, Boolean) |
Saves an image as floating-point values in a binary or text file
|
| SaveImageFloat(windowsList, String, Single, Boolean, Boolean) | |
| SavePhaseOffsetAdjustmentZones | |
| SaveRefHolo |
Saves the current reference hologram (reference holograms are NOT saved in the same format as standard hologram)
|
| SetDistance |
Sets the reconstruction distance for one of the laser source, in [m]. The value must include the Objective-Source Correction.
The new value will be used on the next processed image.
To reprocess the last hologram, call OnDistanceChange(windowsList) after setting the value.
|
| SetHoloRHListSize |
Define the number of holograms which will be averaged to produce the reference hologram
|
| SetMaximumNumberOfSamplesForPhaseMonitor | |
| SetPhaseCorrectionCoefficient | |
| SetSpectrumKxKy | |
| SetSpTilt | |
| SetWavelengthFilterParameters |
Enables/Disables and configures a filter applied to the complex wavefront (it influences both the phase and the amplitude image).
|
| SignalNewImage | |
| SignalNewImage(Int32) | |
| UndoPhaseCorrectionSegment |
Removes the last phase correction segment added for a certain orientation, method and fitting degree, then recomputes the fit
on the remaining segments. Call AutoComputePhaseMaskUsingSegments(windowsList, phaseFitMethod, Int32, Boolean) to apply.
|
| UseCurrentHoloAsRef |
Define how to use the reference hologram. Call CopyHoloToRH(Int32) or SetHoloRHListSize(Int32) and Array.Copy before. (See example
code below)
|
Methods