ProcessingConfiguration Properties

The ProcessingConfiguration type exposes the following members.

Properties

	Name	Description
	AutoFocusDeltaDistance_m	Gets or sets the distance around the current reconstruction distance in which the auto-focus search is performed.
	AutoFocusTolerance_m	Gets or sets the tolerance of the auto-focus method.
	MaximizeAutoFocusContrast	Enables or disables the contrast maximization during auto-focus process.
	PhaseCalibrationDegree	Gets or sets the phase correction degree for calibration mode.
	PhaseCorrectionDegree	Gets or sets the correction degree for the phase fitting.
	PhaseCorrectionDegrees	Gets or sets specific correction degrees for the phase fitting.
	PhaseFittingTool	Gets or sets the phase fitting tool used to perform phase correction.
	PhaseSegmentFittingMethod	Gets or sets the phase fitting method used with segments correction.
	PhaseZoneFittingPolynomialBasis	Gets or sets the phase fitting polynomial basis to perform phase correction using zones only.
	ReconstructionDistance_m	Gets or sets the reconstruction distance in meter.
	RollingTemporalAveragingWindowSize	Enables or disables rolling temporal averaging.
	SaveFrequencySpectrum	Enables or disables the export of frequency spectrum image.
	SaveReconstructedPhaseIntensity	Enables or disables the export of reconstructed phase and intensity images. Those images are extracted before the post-processing.
	SpectrumCenteringKx	Defines the Kx parameter centering the frequency spectrum in width direction.
	SpectrumCenteringKy	Defines the Ky parameter centering the frequency spectrum in height direction.
	SpectrumCenteringMethod	Gets or sets the frequency spectrum centering method when no reference hologram is used.
	UpdateConfigurationCoefficients	Enables or disables the application of coefficients to the config.
	UseAmplitudeDivision	Enables or disables amplitude division of the reference hologram in reconstruction process.
	UseAutoFocus	Enables or disables the auto-focus for each reconstructed hologram.
	UseAutoSpectrumCentering	Enables or disables the automatic frequency spectrum centering when no reference hologram is used.
	UseCalibrationPhaseCorrection	Enables or disables calibration phase correction which performs phase correction independently on each source.
	UseContinuousPhaseCorrection	Enables or disables continuous phase correction which performs phase correction on each frame.
	UseManualFrequencySpectrumFiltering	Enables or disables the manual frequency spectrum filter defined by the user.
	UsePhaseAutoFocus	Uses the phase when performing the auto-focus.
	UseReferenceHologram	Enables or disables reference hologram in reconstruction process.
	UseRollingTemporalAveraging	Sets the window size for rolling temporal averaging. Default value is 1 (which disables the averaging).
	UseShortSyntheticWavelength	Enables or disables the short synthetic wavelength computation.

Top

See Also