 | IReconstruction Methods |
The IReconstruction type exposes the following members.
Methods| Name | Description | |
|---|---|---|
 | AddPhaseCorrectionSegment | Adds a new vertical or horizontal segment. One must call AutoComputePhaseMaskUsingSegments(windowsList, phaseFitMethod, Int32, Boolean) to update the phase correction mask before recomputing the phase image. |
| AddPhaseCorrectionZone | Adds a phase correction rectangular zone. One must call AutoComputePhaseMaskUsingZones(windowsList, phaseFitPolyBase, Int32, Boolean) to update the phase correction mask before recomputing the phase image. |
| AddPhaseMonitorZone | |
| AddPhaseOffsetAdjustmentZone | Adds a phase offset correction zone. (Valid only for the multi-zone phase offset method) |
| AutoComputePhaseMaskUsingSegments | Compute the phase correction coefficients related to the specified method using segments. Then, recompute the phase correction mask using ComputePhaseMask |
| AutoComputePhaseMaskUsingZones | Compute the phase correction coefficients related to the specified method using zones. Then, recompute the phase correction mask using ComputePhaseMask |
| ComputePhaseHistogram | Computes the histogram of the phase image (or of its ROI). Call getPhaseHistogram to get the result. |
| ComputePhaseMask | Recomputes the phase correction mask using the existing correction coefficients. |
| ComputePhaseStdDev | Computes the mean value and standard deviation of the phase image (or its region of interest if one is defined). Use PhaseMeanValue and PhaseStdDev to read the result. |
| ConfigureProcessing | |
| CopyAmp32fToMemStream | |
| CopyAmpToMemStream | |
| CopyHoloToMemStream | |
| CopyHoloToRH | Copies the current hologram known by the reconstruction to the array of holograms used as reference. Prefer a copy to array using GetAvgRHBufHolo(Int32) when using several avaraged holograms |
| CopyImg32fResult(Single, Int32, windowsList) | Copies the floating point image result of processing in a local buffer. |
| CopyImg32fResult(Single, Int32, windowsList, Boolean) | Copies the floating point image result of processing in a local buffer. |
| CopyImgResult | Copies the image result of processing in a local buffer. |
| CopyPhase32fToMemStream | |
| CopyPhaseToMemStream | |
| CreateStitching | (Inherited from IStitchingFactory) |
| CutNewEllFourierRegion | |
| CutNewRectFourierRegion | |
| DoAutoPhaseCorrectionNoCT | |
| DoMonitorPhaseZone | |
| ExtractArbitraryIntensityProfile | Extracts a profile in the intensity (amplitude) image. Use AmpProfile to get the result. |
| ExtractArbitraryPhaseProfile | Extracts a profile in the phase image. Use PhaseProfile to get the result. |
| ExtractProfile | |
| ExtractROI | Sets a region of interest in the phase and intensity images. |
| GetAmp32f | |
| GetAvgBufHolo | |
| GetAvgRHBufHolo | Gets a reference to the byte array to copy the reference hologram data when using several averaged holograms |
| GetDistance | Gets the reconstruction distance for one of the laser source, in [m]. The value must include the Objective-Source Correction. The new value will be used on the next processed image. To reprocess the last hologram, call OnDistanceChange(windowsList) after setting the value. |
| GetNumFourierFilters | |
| GetOplValue | |
| GetPhase32f | |
| GetPhaseCorrectionCoefficient | |
| getPhaseHistogram | Gets the phase histogram. Call ComputePhaseHistogram to compute it. |
| GetPhaseValue | |
| InitProcessingChain | |
| LoadFourierRegion | |
| LoadPhaseOffsetAdjustmentZones | |
| LoadRefHolo | |
| OnDistanceChange | Recomputes the phase mask and redoes the Fresnel transform, then process the images defined in visMask. Call after changing SetDistance(Int32, Double). |
| OnNewImage(windowsList) | Signals that a new image is available in the memory pointed by ImgHolo, gives it to the processing chain and processes it. |
| OnNewImage(Hologram, windowsList) | Gives a new image to the processing chain and processes it. |
| ParsePhaseOffsetAdjustmentZones | |
| PerformAutoFocus | Compute the focus position. |
 | PhaseToHeightNmConversionFactor | Returns the phase [rad] to height [nm] conversion factor. |
| Process | Reconstructs the image pointed by ImgHolo |
| RecomputePostProcessing | Recompute the phase and intensity post processing, including non-measured points mask |
| RecomputeSpectrumKxKy | |
| ReconstructFile | |
| ReconstructSequence | |
| RedoFourierFilter | |
| RefreshAmplitude | |
| RefreshFourier | |
| RefreshIntensityPhase | |
| RefreshPhase | |
| RemoveLastFourierFilter | |
| ResetFourierRegions | |
| ResetPhaseCorrectionSegments | Removes all phase correction segments. One must call AutoComputePhaseMaskUsingSegments(windowsList, phaseFitMethod, Int32, Boolean) to update the phase correction mask before recomputing the phase image. |
| ResetPhaseCorrectionZones | Removes all phase correction zones. One must call AutoComputePhaseMaskUsingZones(windowsList, phaseFitPolyBase, Int32, Boolean) to update the phase correction mask before recomputing the phase image. |
| ResetPhaseMask | |
| ResetPhaseMonitorData | |
| ResetPhaseMonitorZones | |
| ResetPhaseOffsetAdjustmentZones | |
| ResetROI | Removes the region of interest for the phase and amplitude images. |
| ResetTemporalPhaseAverage | Resets the temporal averaging count. The next reconstructed hologram will be the first of the next averaging process. |
| SaveFourierRegion | |
| SaveImage | Saves an image in TIFF format |
| SaveImageFloat(windowsList, String, Single, Boolean) | Saves an image as floating-point values in a binary or text file |
| SaveImageFloat(windowsList, String, Single, Boolean, Boolean) | |
| SavePhaseOffsetAdjustmentZones | |
| SaveRefHolo | Saves the current reference hologram (reference holograms are NOT saved in the same format as standard hologram) |
| SetDistance | Sets the reconstruction distance for one of the laser source, in [m]. The value must include the Objective-Source Correction. The new value will be used on the next processed image. To reprocess the last hologram, call OnDistanceChange(windowsList) after setting the value. |
| SetHoloListSize | |
| SetHoloRHListSize | Define the number of holograms which will be averaged to produce the reference hologram |
| SetMaximumNumberOfSamplesForPhaseMonitor | |
| SetPhaseCorrectionCoefficient | |
| SetSpectrumKxKy | |
| SetSpTilt | |
| SetWavelengthFilterParameters | Configures a filter applied to the complex wavefront (it influences both the phase and the amplitude image). |
| SignalNewImage | |
| UndoPhaseCorrectionSegment | Removes the last phase correction segment added for a certain orientation. One must call AutoComputePhaseMaskUsingSegments(windowsList, phaseFitMethod, Int32, Boolean) to update the phase correction mask before recomputing the phase image. |
| UseCurrentHoloAsRef | Define how to use the reference hologram. Call CopyHoloToRH(Int32) or SetHoloRHListSize(Int32) and Array.Copy before. (See example code below) |
See Also