 | ICamera |
The ICameraController type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AbsShutter | |
| AcquisitionFps | |
| Bpp | |
| Brightness | |
| CameraHologramSource | |
| CameraMemorySource | |
| CameraMemoryStream | (Inherited from ICameraMemoryStream) |
| CameraName | Gets the name of the camera. |
| Digitizer | |
| DualSpeedMode | |
| DualSpeedModeAvailable | |
| Gain | |
| Height | |
| IsAcquiring | |
| IsEnabled |
Gets a value indicating whether this component is enabled in the current configuration.
(Inherited from IDHMDeviceComponent) |
| IsHardwareAvailable |
Gets a value indicating whether the physical component was detected and is available.
(Inherited from IDHMDeviceComponent) |
| IsVirtual | |
| LastHolo | |
| MaxBrightness | |
| MaxBytePerPix | |
| MaxGain | |
| MaxHeight | |
| MaximumAcquisitionFps | |
| MaxShutter | Max shutter register value |
| MaxShutterTrigger_us | |
| MaxShutterUs | Max possible shutter in current conditions, in [us] |
| MaxWidth | |
| MinBrightness | |
| MinGain | |
| MinShutter | Min shutter register value |
| MinShutterUs | Min possible shutter in current conditions, in [us] |
| OffsetX | |
| OffsetY | |
| PixelSizeum | |
| RawCameraStream | (Inherited from ICameraStream) |
| ReservedFlag | |
| SensorReadoutTime_us | |
| Shutter | Current shutter register value |
| ShutterUs | Current shutter, in [us] |
| SourceId | |
| Stride | |
| TriggerExposureMode | Gets or sets the trigger exposure mode. Can be set to Timed or External. When using the "Timed" mode, exposure is controlled by the value of Shutter When using the "External" mode, exposure is controlled by the duration of the trigger signal. Value is only taken into account when UseHardwareTrigger is set to true |
| TriggerPolarity | Gets or sets a value indicating the hardware (external) trigger polarity. Use UseHardwareTrigger to enable hardware trigger. |
| UniqueID | Unique identifier of the camera device. Varies according to the camera type, usually a serial number |
| UseHardwareTrigger | Gets or sets a value indicating whether to use the hardware trigger (external trigger). Use TriggerPolarity to set the trigger polarity. |
| UseMaxShutterTrigger | |
| UseTriggerWidthModeOnLine1 | |
| Width |
See Also