![]() | IDigitizer Properties |
The IDigitizer type exposes the following members.
Name | Description | |
---|---|---|
![]() | AcquiredImageHandle | |
![]() | AcquisitionFps | Gets or sets the acquisition frame rate. |
![]() | Bpp | |
![]() | Brightness | |
![]() | DualReadMode | |
![]() | DualReadModeAvailable | |
![]() | FrameRateIndex | Photron camera only: Gets the current frame rate index in the FrameRateList. |
![]() | FrameRateList | Photron camera only: Gets the list of available frame rate values in [frame/s]. |
![]() | Gain | |
![]() | HardwareTriggerPolarity | |
![]() | Height | |
![]() | IsAcquiring | |
![]() | IsVirtual | Gets a value indicating whether this instance represents a virtual hardware or a real physical one. |
![]() | MaxBrightness | |
![]() | MaxGain | |
![]() | MaximumAcquisitionFps | |
![]() | MaxShutter | Max shutter register value |
![]() | MaxShutterUs | Max possible shutter in current conditions, in [us] |
![]() | MemoryRecordingTimeInMilliSeconds | |
![]() | MinBrightness | |
![]() | MinGain | |
![]() | MinShutter | Min shutter register value |
![]() | MinShutterUs | Min possible shutter in current conditions, in [us] |
![]() | NumberRecordedFrames | |
![]() | OffsetX | |
![]() | OffsetY | |
![]() | RecordStartDateTime | |
![]() | RecordStopDateTime | |
![]() | ReservedFlag | |
![]() | ResolutionIndex | Photron camera only: Gets the current resolution index in the ResolutionList. |
![]() | ResolutionList | Photron camera only: Gets the list of available resolution values in [px*px]. |
![]() | SaveFileEndFrameNumber | |
![]() | SaveFileStartFrameNumber | |
![]() | Shutter | Current shutter register value |
![]() | ShutterInternalMemory | Photron camera only: Gets/sets the value indicating the real value stored in the Photron camera. |
![]() | ShutterList | Photron camera only: Gets the list of available shutter values (the corresponding shutters applied are 1/value [s]). |
![]() | ShutterUs | Current shutter, in [us] |
![]() | Stride | |
![]() | TotalHeight | |
![]() | TotalWidth | |
![]() | TriggerExposureMode | |
![]() | UniqueID | Unique identifier of the camera device. Varies according to the camera type, usually a serial number |
![]() | UseHardwareTrigger | |
![]() | UseTriggerWidthModeOnLine1 | |
![]() | Width |